Inspect your Roof

How to Inspect your Roof

When inspecting your roof for roof problems you will either inspect it yourself or call a trusted roofing contractor for quality to do it for you if you are incapable of climbing or have a steep roof. Most roofing contractors will inspect your roof free of charge in hopes of getting your business. Most roofing Roof Problemscompanies have a maintenance program where they will come out and inspect your roof yearly. If you choose to inspect your roof yourself or use Roof Inspection Services, using binoculars will get you a close look at your roof without being on it. Look for damage that indicates water leaks under your eaves, overhangs, dormers and skylights. Checking your roof on a regular basis will save you money in the long run. Below is some helpful information to help you determine if anything is wrong or damaged on your roof:

When to inspect – You will want to make it a habit of checking your roof in the fall before winter comes, but checking it more often than once a year is advisable. It is definitely a good idea to check your roof after a bad rain, wind or hail storm. High winds and hail can damage shingles that can cause damage to the infrastructure. A neglected roof can cost you much more if not inspected. There are specific things to look for. Just going up on your roof and looking around will not be enough to detect anything that could be wrong. Knowing what you’re looking for will help immensely.

Asphalt Shingles – Asphalt shingles have a granule surface, sort of like fine gravel. When the asphalt ages it will become brittle and as that happens the granules will fall off. Check your gutters to see if you have granules in them. If you have a lot that means your roof is aging and you will see more and more as time goes on. You will want to take a close look at your shingles for bare spots. You will also want to look for tearing in the shingles as well. If you see shingles that are curling or warping then that is a sign your roof needs to be replaced.

Wood Shakes and Shingles – The difference between shakes and shingles is that shakes are hand-split on at least one side and either straight or tapered and shingles are tapered or sawn. You will want to look for signs of warping or dry rot depending on your climate region. If there are more than 1/3 of your shakes or shingles that have warping or dry rot it is time to replace. Do not walk on wood shakes or shingles when inspecting. Foot traffic will cause damage. Taking a set of binoculars will get you a close look to see any damage.

Metal Roof – If maintained properly, metal roofs can have a life expectancy of 50 years. Metal roofs are either galvanized iron, steel, aluminum or copper. Each type of metal will have its own wear characteristic. You will want to look for rusting, pitting and corrosion. These are natural results of aging and also look for open or loose seams and joints which will cause leaking.

Slate/Clay Tiles – These materials will last the lifetime of the home if they are properly cared for. In colder climates these materials are more prone to ice dams. To inspect you will need binoculars to get a close look at their condition as they are brittle and can easily break if walked on. When looking at your roof you will look for chipped, broken or missing pieces.

Flashing – Flashings cover interruptions in the planes of the roof such as around the chimney, dormers and vent pipes. Damaged or faulty flashing will allow rain and melting snow to enter the interior causing rotting and possible damage to the interior walls. If you find damage you will want to fix right away or call a roofing contractor to fix the problem